S-5 STANDING SEAM ROOF/WALL CLIPS-SET OF 4
| ||
|
Product Price: $38.00
|
||
| Product Description | ||
| S-5 CLIPS SET OF FOUR (4). The S-5! clamp systems now offer a complete solution to the attachment of a wide variety of ancillary rooftop accessories, including HVAC equipment, signage, solar panels, snow retention hardware, gas piping and conduit, rooftop lighting, fascias, equipment screens, parapet bracing, condensate lines, stack and flue bracing, antennae, roof walkways and more. S-5! clamps attach to the panel seam by the tightening of two "bullet-nosed" stainless steel set screws against the seam material (this is usually done with an industrial grade screwgun). The set screws compress the seam material against the opposite wall of the clamp. They will "dimple" the seam material, but will not penetrate it. Threaded holes in the clamp (and stainless hardware provided) enable the easy attachment of various ancillary items to the clamps. Aluminum clamps are metallurgically compatible with bare or painted galvanized, Galvalume, Aluminized and Galfan coated steel, as well as bare or painted aluminum, stainless and zinc sheet products. In most applications, the clamp should be installed at a location on the seam that avoids the panel?s attachment clip location. S-5! clamps may also be used at a clip location, provided the clip is an expansion (dual-component) clip. All aluminum clamps are furnished with a stainless steel bolt and washer (3/8" diameter x 5/8" length; bolt head size is 9/16"). | ||
